Review of smok vaporizers nord2 rpm80 mag 225w trinity price nfix coils

I received a Vapeciga smok nord2 kit sourcemore the purposes of this review.

Smok morphing color:

– Gold black
– 7 colors and black
– Black red
– Blue and Black Prisma
– prism black and chrome

Description and features:

– Morph Mod 219 Size – 44.8mm x 30.2mm x 84.5mm
– Battery Type: 18650 dual battery (not included)
– Power range: 1 W-219W
– Display: touch screen 1.9 ”
– Input voltage: 6.4V 8.4V-
– Output voltage: 0.5V-8.2V
– Cooking time: 0.001s
– Charging Current: 1.8A
– Charging voltage: 5V
– Resistance Range: 0.1-2.5ohm (VW) /0.05-2.0ohm (TC)
– Temperature: 200-600 ℉ / ℃ 100-315
Size tank TF -: 25.5 mm x 56 mm
– Capacity of tank: 6 ml
– Discussions Discussions: 510

In the frame:

– Morph Smok MOD 219
– 6 ml reservoir TF Smok
– TF BF-Mesh Smok 0.25ohm tank coil (pre-installed)
– 0.25ohm Smok TF tank coil BF-Mesh
– the protection of glass balls in silicone
– a glass tube Replacedment
– USB Cable
– Handbook
– Room

rpm80 pro battery get code tf:

Tf is 56 ohms of mm in height and 25.5 mm in diameter. In the package with the atomizer you will receive a glass tank and bubbles clear glass tank were very good, also received a protective silicone glass tank and two coils. atomizer good build quality, the yarn is fine and everything is as it should be. Previously, you could see atomizer “Smok” and the bottom of the atomizer can see atomizer “Designed by Smok” you can buy 5 different colors.

Atomizer equipped with a drip edge 510 pre-installed, so that the atomizer can be used another tip 510 reduction if he did. Drop by removing points are pre installed very nice and I think it is convenient to use. I think it is great that finally made the atomizer 510 is supported, but for some people it would be preferable that the atomizer is compatible with 810 drip tips, however, drops packaging peak are very comfortable and beautiful.

This is a high filling syringe. Before you can see the atomizer key to press to install. When the top cover is pressed, you can view the contents of the hole. Fill large holes and atomizer can be filled without problems, so basically, filling here is very simple and can fill atomizer very fast. More filling works well and should not leak when a sprinkler system is required.

glass syringes fitted with a bubble tank and pre-installed in the box will receive regular glass tank. Ordinary glass capacity tank atomizer has a capacity of glass bubbles tank capacity of 2 ml and 6 ml is very good and I think a lot of people that the tank capacity. With the atomizer, you receive a protective silicone in the glass tank to protect the tank in case you drop, very good in my opinion.

Using the spray, you get two rolls and even two coils. Coil is bf mesh coil and the coil resistance 0.25ohm, it is recommended to power the coil is 30-80w 60-70w and better jobs. Maybe really easy to change the atomizer of the coil, you need to do is push the atomizer coil, it is very easy and simple. When the coil is used first, must be primed with a few drops and can be inserted into the atomiser and a filled syringe.

Basically, you can see the air flow control ring and the ring can be seen two slots airflow. Air flow control ring, we have some details that help when you want to adjust the air flow, so you can adjust more easily or more airflow and allows you to set aside will be the same oher side.

How it works? And my mind Atomizer:

atomizer the build quality is very good, everything is as it should be. It comes with 510 installed sophisticated drops very good because you can use a 510 drops atomizer tip. Drop for drop preinstalled which I think is comfortable to use. 810 atomzier will be more compatible with drops of advice, so this could be a drawback for some people. The system is very easy to fill and can fill the tank very fast, so far, it works well. The capacity of the container is 2 ml glass type, but with a capacity of glass bubbles vessel very good capacity of 6 ml. In this package, we received a silicone protector for your tank that was really good. Really can easily replace the coil in the atomizer and the atomizer, you will receive two coils.

Show new smok mag 225w very well, taste and also a good steam, this is not the best mesh coils there, but certainly better taste than many I’ve tried sprays. Therefore, the tank is very tf solid deposit in ohms, worked well and it was quite easy to use.


– Not compatible with 810 drip tips


– The build quality is good
– easy to fill
– Compatible with 510 points drip
– comfortable preloaded points fall fall
– 6 ml reservoir capacity bubbles
– Protective silicone
– The good taste
– Two coils in the package
– Easy to replace the coil


Smok Morph is powered by two 18,650 batteries and this model works 1-219w. You can buy this model in 5 different colors.
44.8mm x 30.2mm dimensions of this model are x 84.5mm. mod good build quality, everything is as it should be. This mod design is very good in my opinion, they received this blue mod and you can tell a great painting. This device is very convenient to use, with no sharp edges and large shutter button, because it is a very nice feel in the hand. Faced with this mod you can see “Smok” and behind the mod, you can see the “Morph”. This model has a touch screen that I really like and also supports multiple operating modes that can be used as am.

From the top you can see the connection mod and here we have a gold plated pin spring. Put here is good and I have no problem with atomizers discussed here. A good connection, which rises slightly, which is good because you do not scratch the Ministry of Defense with atomizers. In this mod, you can use aerosols up to 26 mm in diameter, which is more than was good for me.

Under mod you can see the battery cover. I really like the locking mechanism of the battery cover.When the battery cover is opened, you can see how mod smok trinity alpha price click in paintings batteries and is powered by two batteries 18650.

So far I have not had a problem with the battery cover. When the batteries are mod mod noise and when there was a good rattle.

On one side of the mod, you can see the shutter button. The trigger is huge and really the trigger. the shutter button is very convenient to use, is the dislocation and works very well. At the top you can see the shutter button and a button using this button, you can lock the screen or off screen. When you hold down the button lock screen and clicking the button, you can turn off the screen.

On the front of the mod, you can see the screen and USB.
You can use the USB port for software updates or to charge the battery half load balancer, but as always, I recommend to recharge the batteries in an external charger.
In this device, we have a color screen is a very good screen, great, the size of the screen is a 1.9inch screen and in my opinion, this device looks very nice and it’s really a touch screen.

To activate it, you must click the trigger 5 times and must do the same to turn it off. When the device is in the power display mode, you will see:

– I can not
– locking / unlocking
– Time hojaldre
– W
– Preheat
– Left and right
– Resistance
– V
– against cerebrovascular accident
– A
– The battery indicator

The touch screen works well and so far I have not had a problem with the screen. Also on the screen, you can see everything nice and screen brightness are very good.
In the Enter menu, you can see:

– Modus
– My style
– hojaldre
– Set

When the mode is selected, you can choose different modes:

– Watt
– temperature Ti
– Temperature Ni
– Temperature Ss

If you choose me mode, you can set 4 different operating modes, and you can adjust your diet, you can pre-heat and add the name of liquid and network card.
If you choose to blow the breath, you can reset the counter.
you can see when the setting is inserted:
– General (on restoring factory, accessibility, food)
– Chip (Info)
– topics
– Access code

If you choose a theme, you can choose a different background and you can choose different colors on the screen and can also set the screen timeout. If you select the access code, you can set your own password, the device asks each time the battery is placed in the mod.

How do these devices work and my thoughts:

So vapeciga smok nfix coils is very good in my opinion, and certainly one of the best mods out there, I particularly like blue.

mod good build quality and complaining morning. Chateo also looks good, but I have to say that this magnet mod Fingerprints will be hurt someone. In the device can be used for a diameter of 26 mm without atomziers good projection. You really can be easy to put the battery in the Ministry of Defense and to the dind’t have a problem with the battery cover. Nothing rattle when shaken battery and when the mornings. Triggers are great and I really like the trigger type. It works well and dislocation. It is also good that we have a key to lock / unlock the screen and turn on / off screen. This model also supports load balancing, but as always recharge your batteries suggested in an external charger. Really beautiful screen and on the screen, we have all the information we need, big screen, the screen brightness is good and works well. I also like that we can change the color of the screen. This device has many options yet very easy to use. Mod works very well if you ask me, I tried with my MTL and atomizers me DTL and running smoothly and will probably continue to use everyday devices. If you are considering buying this mod and mod design you want, I can tell you all that this camera can be accomplished safely.


– fingerprint magnet


– Good build quality
– Good design
– Painting Good
– can be used up to 26 mm in diameter without false atomizers
– Connection slightly
– comfortable to use
– cozy fire button
– Screen Buttons
– a beautiful and big screen
– a good screen brightness
– Much of the information on the screen
– Easy to use
– The screen works well
– Theme Options
– Balancing the load
– the battery door is working well
– My selection method
– Password Option
– No ring

sourcemore thanks

You can buy the kit here: smok vaporizers

Leave a Reply