The vapeciga dovpo m vv is the latest in a little-known Dovpo. I have a ton of their product, but as they do VV mod M a few years, and dead and double work mods Squonk superstructures were also very good, so overall a solid company formed my limited experience of the end.
I also recently revised its sheath kit D-salt and the presentation of new BLOTTO soon too. M II is a double VV VV mod 18650 (variable voltage) measured at 280 watts to adjust the pot (potentiometer) on the front panel. It is available in 3 colors all with a black frame and panel design which only differs Skull and Roses, Dragon Samurai, and Hannya. Look around online, I do not see available in China and around 27-35 dollars.
Construction of a zinc alloy + PC
Output voltage: 1-8V
maximum power of 280 Watt
Voltage: 6.4V 8.4V-
Resistance Range: 0.08-3.5ohm
protection against overheating
Additional hours of vaping warning
Protection against reverse battery
Powered by two 18650 batteries (batteries sold separately)
LED displays the battery life
New aesthetic look stylish and colorful designs
Threaded connector 510
Port of load C-USB
Included in the box:
M VV Mod II Box
Type C USB Cable
first impressions and characteristics
When Mod, I am very surprised, because there is a ton of mods battery made today doubles again and even rarer is a squonk mod show new.
This was the murderer benecig saw him a year ago and since then I think the only other IJOY game. No mod created this style often, so I’m happy to see that. I also like the original VV mod M is always best to be found in IMO General VV mod and super cheap around $ 30 and can still price, so I would like to know if this mod will increase. I personally do not mind the work of a good group, but that’s just my opinion. I liked the design of the best original plan. house also has a metal body and soft layers to your new temporary PC (polycarbonate) to light. The other major difference is the battery meter and has a USB port C in general, but I was like illustration to start.
Performance (graphics and spreadsheets in a photo album)
Now let’s get into some of the data. I ran the normal tests. I use a battery test VTC5A Sony. The tensile tests performed at 0.1, 0.17, 0.2 and 0.63 ohms. Note that the boat without digital screen, make every effort to walk 2, 3 and 4 are the same each time, but maybe a little variety. 1 and 5 parameters that are easy for all one-way streets. It was created to provide a basic guide of what to expect at each setting and test the maximum and minimum power is important in this mods. With the construction of 0.1 ohms and 143 watts reaches 38 amperes I max. Today amplifier dual battery half mod. 3787 volts is the maximum resistance (limited by ampere) and the minimum I get is .736V 5 Watt and so much tension and range of watts. Built with 0.17 watts maximum 218 280W short so if you are registered, which is similar to the original problem. The voltage range is from 0.736 to 6.101 and about 3-219 watts. 0.2 ohms and 213 watts construction Imax voltage range is from 0.842 to 6.522 and a range of 4-213 watts so it is good again. 0,63 ohms building has a range of 0842-7994 voltage and power range of 1 to 101. Very good again.
They make a list of all specifications as well. They list 280 watts maximum, but fell short in its list of 45 219. maximum amplification which in turn keeps short-range and 40 would be fairer, but limiting amplifier standard two watts and a good limit for the course dual battery mod. 38 amps and 219 watts.
They list the output voltage range of 1-8V which is the biggest I’ve seen in any of these modifications mass produced basium vape click in and a big reason why I love them and they are great qualifying and the point from which tried the range is from 0.736 to 7994.
Overall I felt the performance was very good mod. Very similar maybe even the same chip and same with the original. It has a wide voltage range of my love. Compared with VV mod last try to be benecig killer, who dovpo M VV II has amp maximum and low power, but realistically speaking, we do not recommend vaping over 150 watts are also twice 18650 mod and is not nearly 220, and most people vaping not too high and the same applies amplifier limits were more than adequate and in line with most mods, even if it is slightly shorter than the killer. both have a better voltage range, then the killer is why I love this mods and find better results. The only complaint about this specification is redundant.
TLDR overview of energy efficiency
the performance is very good mod. Good range of VV mod (.736V to 7.994V), Max 219 watt, 38 amp maximum of two double-18650 good mod but both types listed below.
Note the use of other
This mod uses a standard 5 clicks to turn on and off. This is a dovpo nickel 230w mod get code so no menu or mode.
This is just the shutter button and the tray to adjust the voltage. The ship is only right to reduce production and to the right to increase production. nice boat is large and easy to install. No screen or another button on it appears and nothing appeared TC mode appears. mod itself is built solid without rattling the key PC and light body. The side panels of the door of the battery cover property standard magnet and is suitable without playing in it. excellent scenarios of battery life on the sled as well and it is easy to get in and out and do not need to wrap destruction.
paint looks good and not scratched, and I have not seen in me, even at the bottom. PC in all black body with a matte finish. The only color in the panel. I have a sound skull and roses are works of art with a large skull in the center and around the roses. It does so not my personal style. Nice and simple shutter button displacement concave circle. It works well and never hitch or anything, though, which is as it should be. 510-pin gave me a problem and each atomizer i used in the great work without a gap. Mod handle atomizer 25 mm. Cantilever something bigger. 510 moved slightly back and forth then the whole section, but the front and rear of the inclined platform. MOD also for the brand itself does not exist.
LEDs on the battery meter MOD act as well. Green means the battery is 7.6V or more, which means yellow 7V-7.6V, which means Red 6.9V or less. recorded 6.4V cut delicate cells. good job there in its entirety, but step 4 will be fine. LED is only activated during cooking. I can not find the charges listed and are not recommended to charge the battery in the mod if you can avoid, but for informational purposes a test level USB charging with a subway line and get the maximum load 1.78A and 2A basically load.
mod build quality
wide voltage range
watt amplifier and a good limit
simple, easy to use
The battery is easy to obtain, without damaging the package
The keys are fire and
Good pin 510
LEDs act as the battery indicator
Pot is easy to adjust
Mod handle 25 mm without false Atty
Mod mod calling the current mec mec
Lack of color options (black only 3 panel design with a busy, no matter I)
Watt redundant and limits Amp
The battery indicator can use a step-by-4
So with all that said, I recommend this mod or not? I do not like so hard or not, but it’s pretty easy to lean toward him topside show new.Its price is very reasonable as low as $ 27 and it works. Personally, I prefer the original is better because it looks and design, but the same performance between the two so it was just a matter of preference. If you are in the market for a VV mod and as we see, is an excellent purchase. I added to my CV RECs link below.
You can buy here:dovpo mod https://www.vapeciga.com/collections/dovpo